Water Leak Detection Services in Tukwila, WA
Finding a hidden water leak starts with separating the visible symptom from the place where the water is actually escaping. We serve Tukwila with specialized equipment for residential, commercial, slab, and underground leak locating.
Water leaks don't follow a convenient timeline in Western Washington. A supply line installed decades ago under a concrete slab behaves differently than PEX run through a new subdivision - and neither one announces itself politely. What they share is that the longer they go undetected, the more expensive they become.
Simply Leak Detection has been locating water leaks across the Puget Sound region and Western Washington since 2010. In that time we've located more than 10,000 leaks in homes and commercial properties of every age, construction type, and pipe material - with a 4.9-star rating earned one accurate, non-invasive inspection at a time.
We bring the same equipment and the same standard to every job: acoustic sensors, thermal imaging, tracer gas where needed, and a written summary of findings with photos included with every invoice. No guessing. No oversized repair scope.
Signs you might have a hidden leak
We're most often called in when a plumber has already looked and can't find it - but if you're experiencing any of the following, you don't need to wait that long.
Unexplained spike in your water bill
If your bill jumped without a change in usage habits, water is going somewhere it shouldn't - possibly underground or inside a wall.
Water meter moving when everything is off
Turn off every fixture and appliance, then watch your meter. Any movement - even a slow crawl - confirms water is actively leaving the system somewhere.
Soggy yard patches or zones that stay wet
Sections of lawn or landscaping that are consistently wetter than the rest - especially when the irrigation hasn't recently run - often point to a buried line failure.
Well pump running excessively
If you notice your well pump frequently cycling on (by hearing it, seeing an indicator light, or noticing a high electric bill) when no water is in use, you may have a leak.
Low or inconsistent water pressure
A supply line losing water before it reaches your fixtures will often show up first as pressure that drops or fluctuates for no clear reason.
Sound of running water with nothing on
Hissing, trickling, or rushing water sounds when every tap and appliance is off is a classic indicator of a pressurized leak somewhere in the system.
Warm or hot spots on your floors
A hot-water supply line failing beneath a concrete slab radiates heat upward. Warm patches on tile or hardwood floors are a common early sign of a slab leak.
Wet patches on walls, ceilings, or floors
Moisture that appears without an obvious source - no recent rain, no spill - usually means water is migrating from a hidden pipe failure nearby.
Musty smell, mold, or mildew without a visible cause
Persistent musty odors or mold growth in an area that never gets wet from normal use often traces back to a slow, long-running leak behind or beneath the surface.
Foundation cracks, settling, or uneven floors
Long-running slab leaks erode the soil beneath a foundation. New cracks in concrete or drywall, doors that stick, or floors that feel uneven can all follow from that movement.
Rotten egg or sulfur smell in your house
That distinct sulfur odor is added to natural gas specifically so you'll notice it. A smell near a gas line, appliance, or in your house warrants immediate investigation.
Your plumber said to call a leak detection specialist
Plumbers refer to us when a leak won't reveal itself to standard diagnostics. If yours suggested a specialist, that's exactly what we do.
Services We Offer in Tukwila
From residential slab leaks to commercial irrigation systems, we locate water leaks and leaks on privately owned gas lines downstream of the meter using non-invasive equipment.
Locate buried supply-line leaks without trenching your yard, driveway, or landscaping.
Learn more →Find hidden leaks inside walls, floors, and under slabs - no exploratory demolition.
Learn more →Pinpoint sprinkler and irrigation mainline leaks without disturbing your landscape.
Learn more →Acoustic and thermal pinpointing under concrete - no guesswork, no unnecessary jackhammering.
Learn more →Precision leak detection for offices, retail, and industrial buildings with minimal tenant disruption.
Learn more →Identify the source unit and line quickly to contain damage and resolve disputes.
Learn more →Locate leaks in fire suppression systems without compromising building life-safety systems.
Learn more →Find leaks in large-diameter water mains and underground distribution lines.
Learn more →Locate non-metallic poly and PEX pipe routes acoustically when tracer wire is unavailable.
Learn more →Locate buried utilities before digging to avoid costly and dangerous strikes.
Learn more →Pinpoint electrical ground faults in underground conduit and direct-bury systems.
Learn more →Locate leaks on privately owned gas lines downstream of the meter, typically within a home.
Learn more →Licensed, insured, and earning 4.9 stars since 2010.
- ✓Washington State licensed and fully insured - UBI# 605905758
- ✓4.9-star average across 300+ verified reviews from homeowners and property managers
- ✓Clear pricing before we start - no surprises, no trip fees buried in fine print
- ✓Serving the greater Puget Sound and Western Washington for 15+ years
Three steps. No guessing.
Call or schedule online
Tell us what you're seeing - bill spikes, wet spots, meter movement. We gather details so we arrive prepared.
Non-invasive inspection
Acoustic sensors, thermal imaging, and tracer gas where needed. No jackhammers. No unnecessary openings. No guesswork.
Written summary with exact location
Precise location and photos in a summary of findings included with every invoice.
Underground & Irrigation Leak Detection
A buried water line doesn't announce itself. Whether it's the service line running from the meter to your foundation, a mainline crossing the property, or an irrigation zone that hasn't shown up on a bill yet, underground leaks share one inconvenient trait: they run quietly until the damage is visible or the water loss becomes impossible to ignore. Our underground leak detection work covers all of it - from city-side service connections through to the sprinkler manifold at the back of the yard. See our underground leak detection and irrigation leak detection service pages for more detail.
Irrigation and sprinkler systems are among the most commonly overlooked underground leak sources because the affected zones aren't under constant observation. A cracked mainline between the backflow preventer and the valve manifold can run continuously - not just during irrigation cycles - adding thousands of gallons of loss before a water bill flags it. Signs include zones that stay wet between cycles, a controller that cycles normally but loses pressure at the heads, or a meter that keeps moving when everything is supposed to be off.
Underground water pipe leaks are located primarily through acoustics; we typically also use a safe nitrogen/hydrogen tracer-gas blend as additional confirmation of the leak location. We mark the exact leak point, typically within a foot, so the repair is a targeted dig rather than a trench across the lawn. Your landscaping stays intact until the repair contractor needs to open it, and only where they need to.
In-Home & Under-Slab Leak Detection
Water leaks inside a home follow gravity and find the path of least resistance - which means the visible damage and the actual source are often in different places. A slow leak in a supply line inside a wall cavity can soak insulation for months before it reaches drywall. A pinhole in a hot-water line under the slab can migrate along a concrete crack and surface six feet away. Accurate residential leak detection means finding the source, not the damage.
We approach in-home and slab leak detection the same way we approach underground work: isolate the system, pressurize it, and use acoustic sensors to follow the signal to its origin. For slab locates, that means pinpointing the position relative to the foundation before any concrete is cored. For in-wall work, it means marking the stud bay and height so the patch is surgical. If there's concern about a privately owned gas line downstream of the meter, typically within the home, we can assess it in the same visit. The gas company is responsible for leaks on the underground service line leading up to the meter.
The outcome is always the same: a written summary of findings, included with every invoice, with an exact location and material information where known. Your plumber or repair contractor gets a clear target, not a search zone.
For multi-family properties and HOAs, speed of identification is everything - the longer the source is unknown, the more units, common areas, and building systems are exposed to ongoing water damage. The same precision approach we bring to slab leak detection under a single-family home applies just as directly to a multi-story building with four risers and twelve units.
In both cases, accuracy at the locate stage directly controls the cost of the repair stage. An exact location means one precise opening, one targeted repair, and a written summary of findings included with every invoice that closes the insurance loop cleanly. Guesswork means multiple openings, extended timelines, and conversations nobody wants to have.
Common questions from Tukwila customers
We use calibrated acoustic ground microphones, thermal imaging cameras, and a safe nitrogen/hydrogen tracer-gas blend. Underground water pipe leaks are located primarily through acoustics; we typically also use the tracer-gas blend as additional confirmation of the leak location. The method depends on pipe material, location, and leak type.
In the right conditions, accurate to within a foot or less. Accuracy depends on soil type, pipe material, depth, and ambient noise. Finished flooring and concrete affect how we listen. Underground water pipe leaks are located primarily through acoustics; we typically also use a safe nitrogen/hydrogen tracer-gas blend as additional confirmation of the leak location.
Most residential inspections take one to two hours. Larger commercial properties, complex underground systems, or intermittent and very slow leaks may take longer. We give you a time estimate based on scope when you schedule.
Yes - we locate leaks on privately owned gas lines downstream of the gas meter, typically within a home. The gas company is responsible for leaks on the underground service line leading up to the meter. If you smell gas or suspect an active leak, leave the area and call 911 or your gas company first.
It's uncommon, but very slow or intermittent leaks can be difficult to detect in a single visit. When that happens, we're transparent about what we found, what we ruled out, and what the appropriate next step is. We don't leave without a clear path forward.
Have a question we didn't answer?
Have a leak? We'll find exactly where it is.
Non-invasive leak detection for homes and businesses in Tukwila and across Western Washington. Written summary of findings and exact location - same day.