Water Leak Detection Services in Snohomish, WA
A leak behind a wall, beneath concrete, or under the yard can waste water long before the source becomes visible. We serve Snohomish with specialized equipment for residential, commercial, slab, and underground leak locating.
A water leak in a managed property has a way of becoming everyone's problem fast - a stained ceiling two floors down, a water shutoff that displaces tenants, and a plumber who needs to open walls before knowing where to look. For property owners and managers in the area, that sequence is expensive and avoidable.
Simply Leak Detection locates the source precisely before anything opens. Whether the loss is in a supply riser, under a slab, or feeding a specific tenant unit, we isolate the system, use non-invasive acoustic and thermal instruments, and deliver findings the same day - with photos and exact coordinates your plumber and insurer can act on immediately.
We work directly with property managers, HOA boards, and building owners across the greater Seattle area. Discreet scheduling, no tenant disruption beyond a brief pressure test, and a written summary of findings included with every invoice make the repair conversation straightforward.
Signs you might have a hidden leak
We're most often called in when a plumber has already looked and can't find it - but if you're experiencing any of the following, you don't need to wait that long.
Unexplained spike in your water bill
If your bill jumped without a change in usage habits, water is going somewhere it shouldn't - possibly underground or inside a wall.
Water meter moving when everything is off
Turn off every fixture and appliance, then watch your meter. Any movement - even a slow crawl - confirms water is actively leaving the system somewhere.
Soggy yard patches or zones that stay wet
Sections of lawn or landscaping that are consistently wetter than the rest - especially when the irrigation hasn't recently run - often point to a buried line failure.
Well pump running excessively
If you notice your well pump frequently cycling on (by hearing it, seeing an indicator light, or noticing a high electric bill) when no water is in use, you may have a leak.
Low or inconsistent water pressure
A supply line losing water before it reaches your fixtures will often show up first as pressure that drops or fluctuates for no clear reason.
Sound of running water with nothing on
Hissing, trickling, or rushing water sounds when every tap and appliance is off is a classic indicator of a pressurized leak somewhere in the system.
Warm or hot spots on your floors
A hot-water supply line failing beneath a concrete slab radiates heat upward. Warm patches on tile or hardwood floors are a common early sign of a slab leak.
Wet patches on walls, ceilings, or floors
Moisture that appears without an obvious source - no recent rain, no spill - usually means water is migrating from a hidden pipe failure nearby.
Musty smell, mold, or mildew without a visible cause
Persistent musty odors or mold growth in an area that never gets wet from normal use often traces back to a slow, long-running leak behind or beneath the surface.
Foundation cracks, settling, or uneven floors
Long-running slab leaks erode the soil beneath a foundation. New cracks in concrete or drywall, doors that stick, or floors that feel uneven can all follow from that movement.
Rotten egg or sulfur smell in your house
That distinct sulfur odor is added to natural gas specifically so you'll notice it. A smell near a gas line, appliance, or in your house warrants immediate investigation.
Your plumber said to call a leak detection specialist
Plumbers refer to us when a leak won't reveal itself to standard diagnostics. If yours suggested a specialist, that's exactly what we do.
Services We Offer in Snohomish
From residential slab leaks to commercial irrigation systems, we locate water leaks and leaks on privately owned gas lines downstream of the meter using non-invasive equipment.
Locate buried supply-line leaks without trenching your yard, driveway, or landscaping.
Learn more →Find hidden leaks inside walls, floors, and under slabs - no exploratory demolition.
Learn more →Pinpoint sprinkler and irrigation mainline leaks without disturbing your landscape.
Learn more →Acoustic and thermal pinpointing under concrete - no guesswork, no unnecessary jackhammering.
Learn more →Precision leak detection for offices, retail, and industrial buildings with minimal tenant disruption.
Learn more →Identify the source unit and line quickly to contain damage and resolve disputes.
Learn more →Locate leaks in fire suppression systems without compromising building life-safety systems.
Learn more →Find leaks in large-diameter water mains and underground distribution lines.
Learn more →Locate non-metallic poly and PEX pipe routes acoustically when tracer wire is unavailable.
Learn more →Locate buried utilities before digging to avoid costly and dangerous strikes.
Learn more →Pinpoint electrical ground faults in underground conduit and direct-bury systems.
Learn more →Locate leaks on privately owned gas lines downstream of the meter, typically within a home.
Learn more →We find it. Your plumber fixes it. No overlap.
- ✓Same-day written summary of findings with photos, included with every invoice, for your repair contractor
- ✓No-dig approach keeps landscaping, driveways, and hardscape intact until the actual repair
- ✓We don't repair leaks - so we have no incentive to misidentify a problem or overscope the job
- ✓The plumbers who know leak detection best are the ones who send us their toughest calls
Three steps. No guessing.
Call or schedule online
Tell us what you're seeing - bill spikes, wet spots, meter movement. We gather details so we arrive prepared.
Non-invasive inspection
Acoustic sensors, thermal imaging, and tracer gas where needed. No jackhammers. No unnecessary openings. No guesswork.
Written summary with exact location
Precise location and photos in a summary of findings included with every invoice.
Underground Water Leak & Sprinkler Line Detection
Underground leaks are a broad category - buried service lines, mainlines, irrigation circuits, and in some cases gas distribution lines running through a property - and they share a common problem: the only way to know exactly where the loss is occurring is with specialized detection equipment. We handle the full range, from locating a single break in a half-inch residential supply line to mapping and testing a multi-zone commercial irrigation system across several acres. See our underground leak detection and irrigation leak detection service pages for more detail.
Commercial irrigation systems - multi-zone controllers, backflow prevention assemblies, and valve manifolds - operate under enough pressure that a single failed valve or cracked mainline can waste thousands of gallons before anyone notices. Property managers, HOAs, and landscaping contractors call us when a zone stops performing, a meter shows unexplained loss, or an irrigation contractor has traced the problem as far as their own equipment can reach. For properties without existing as-builts, we map the line first, then locate the leak - delivering a marked repair point and a written summary of findings included with every invoice that your contractor can work from directly.
Residential sprinkler systems get the same treatment. If it runs underground and it's losing water, we can find where - without turning your yard into a trench to do it.
In-Home & Under-Slab Leak Detection
Water leaks inside a home follow gravity and find the path of least resistance - which means the visible damage and the actual source are often in different places. A slow leak in a supply line inside a wall cavity can soak insulation for months before it reaches drywall. A pinhole in a hot-water line under the slab can migrate along a concrete crack and surface six feet away. Accurate residential leak detection means finding the source, not the damage.
We approach in-home and slab leak detection the same way we approach underground work: isolate the system, pressurize it, and use acoustic sensors to follow the signal to its origin. For slab locates, that means pinpointing the position relative to the foundation before any concrete is cored. For in-wall work, it means marking the stud bay and height so the patch is surgical. If there's concern about a privately owned gas line downstream of the meter, typically within the home, we can assess it in the same visit. The gas company is responsible for leaks on the underground service line leading up to the meter.
The outcome is always the same: a written summary of findings, included with every invoice, with an exact location and material information where known. Your plumber or repair contractor gets a clear target, not a search zone.
If you are planning an upcoming project requiring excavation on your property, we also provide underground private utility locating before any ground is broken - which prevents costly and dangerous strikes on existing infrastructure.
The non-invasive approach we apply to water leaks extends to private utility locating as well. Every private utility locate ends with documented findings - exact location and pipe material where known - so the team doing the repair or the excavation has a clear, professional record to work from.
Common questions from Snohomish customers
Yes. Non-invasive detection is the whole point. We use acoustic sensors, thermal cameras, and tracer gas - none of which require opening walls, shutting off water to occupied units beyond a brief pressure test, or issuing disruption notices to tenants. We schedule around operational hours when needed.
We isolate the building's water system by floor, riser, or tenant zone using valve and pressure tests, then use acoustic and thermal instruments to follow the leak signal to its source. In many cases we can narrow it to the specific floor and line segment on the first visit.
Yes, regularly. We understand that managed properties have different billing, reporting, and scheduling requirements than residential calls, and we accommodate that. We can coordinate with on-site staff, report to property management directly, and schedule in phases when the property requires it.
We try to accommodate urgency - an active, high-volume leak is a different conversation than a slow, monitored loss. Call us with the details and we'll give you a realistic scheduling window. For situations that can't wait, we make every effort to respond the same day.
Our written summary of findings, included with every invoice, documents the leak source and location with photos. Most insurance adjusters and contractors accept it as part of the claim package. In our experience, the summary provides what is needed to establish the source, scope the repair, and support the claim.
Have a question we didn't answer?
Have a leak? We'll find exactly where it is.
Non-invasive leak detection for homes and businesses in Snohomish and across Western Washington. Written summary of findings and exact location - same day.