Water Leak Detection Services in Everett, WA
A leak behind a wall, beneath concrete, or under the yard can waste water long before the source becomes visible. Simply Leak Detection provides non-invasive locating for homes, businesses, and managed properties in Everett.
Water leaks don't follow a convenient timeline in Western Washington. A supply line installed decades ago under a concrete slab behaves differently than PEX run through a new subdivision - and neither one announces itself politely. What they share is that the longer they go undetected, the more expensive they become.
Simply Leak Detection has been locating water leaks across the Puget Sound region and Western Washington since 2010. In that time we've located more than 10,000 leaks in homes and commercial properties of every age, construction type, and pipe material - with a 4.9-star rating earned one accurate, non-invasive inspection at a time.
We bring the same equipment and the same standard to every job: acoustic sensors, thermal imaging, tracer gas where needed, and a written summary of findings with photos included with every invoice. No guessing. No oversized repair scope.
Signs you might have a hidden leak
We're most often called in when a plumber has already looked and can't find it - but if you're experiencing any of the following, you don't need to wait that long.
Unexplained spike in your water bill
If your bill jumped without a change in usage habits, water is going somewhere it shouldn't - possibly underground or inside a wall.
Water meter moving when everything is off
Turn off every fixture and appliance, then watch your meter. Any movement - even a slow crawl - confirms water is actively leaving the system somewhere.
Soggy yard patches or zones that stay wet
Sections of lawn or landscaping that are consistently wetter than the rest - especially when the irrigation hasn't recently run - often point to a buried line failure.
Well pump running excessively
If you notice your well pump frequently cycling on (by hearing it, seeing an indicator light, or noticing a high electric bill) when no water is in use, you may have a leak.
Low or inconsistent water pressure
A supply line losing water before it reaches your fixtures will often show up first as pressure that drops or fluctuates for no clear reason.
Sound of running water with nothing on
Hissing, trickling, or rushing water sounds when every tap and appliance is off is a classic indicator of a pressurized leak somewhere in the system.
Warm or hot spots on your floors
A hot-water supply line failing beneath a concrete slab radiates heat upward. Warm patches on tile or hardwood floors are a common early sign of a slab leak.
Wet patches on walls, ceilings, or floors
Moisture that appears without an obvious source - no recent rain, no spill - usually means water is migrating from a hidden pipe failure nearby.
Musty smell, mold, or mildew without a visible cause
Persistent musty odors or mold growth in an area that never gets wet from normal use often traces back to a slow, long-running leak behind or beneath the surface.
Foundation cracks, settling, or uneven floors
Long-running slab leaks erode the soil beneath a foundation. New cracks in concrete or drywall, doors that stick, or floors that feel uneven can all follow from that movement.
Rotten egg or sulfur smell in your house
That distinct sulfur odor is added to natural gas specifically so you'll notice it. A smell near a gas line, appliance, or in your house warrants immediate investigation.
Your plumber said to call a leak detection specialist
Plumbers refer to us when a leak won't reveal itself to standard diagnostics. If yours suggested a specialist, that's exactly what we do.
Services We Offer in Everett
From residential slab leaks to commercial irrigation systems, we locate water leaks and leaks on privately owned gas lines downstream of the meter using non-invasive equipment.
Locate buried supply-line leaks without trenching your yard, driveway, or landscaping.
Learn more →Find hidden leaks inside walls, floors, and under slabs - no exploratory demolition.
Learn more →Pinpoint sprinkler and irrigation mainline leaks without disturbing your landscape.
Learn more →Acoustic and thermal pinpointing under concrete - no guesswork, no unnecessary jackhammering.
Learn more →Precision leak detection for offices, retail, and industrial buildings with minimal tenant disruption.
Learn more →Identify the source unit and line quickly to contain damage and resolve disputes.
Learn more →Locate leaks in fire suppression systems without compromising building life-safety systems.
Learn more →Find leaks in large-diameter water mains and underground distribution lines.
Learn more →Locate non-metallic poly and PEX pipe routes acoustically when tracer wire is unavailable.
Learn more →Locate buried utilities before digging to avoid costly and dangerous strikes.
Learn more →Pinpoint electrical ground faults in underground conduit and direct-bury systems.
Learn more →Locate leaks on privately owned gas lines downstream of the meter, typically within a home.
Learn more →Technology that finds the leak. Not one that guesses.
- ✓Acoustic correlators and ground microphones calibrated for Pacific Northwest soil and pipe conditions
- ✓Acoustic route locating for plastic poly and PEX lines without tracer wire
- ✓10,000+ leaks located since 2010 - we know what we're listening for
- ✓Precise enough to guide a single-core concrete repair instead of exploratory demolition
Three steps. No guessing.
Call or schedule online
Tell us what you're seeing - bill spikes, wet spots, meter movement. We gather details so we arrive prepared.
Non-invasive inspection
Acoustic sensors, thermal imaging, and tracer gas where needed. No jackhammers. No unnecessary openings. No guesswork.
Written summary with exact location
Precise location and photos in a summary of findings included with every invoice.
Underground & Irrigation Leak Detection
A buried water line doesn't announce itself. Whether it's the service line running from the meter to your foundation, a mainline crossing the property, or an irrigation zone that hasn't shown up on a bill yet, underground leaks share one inconvenient trait: they run quietly until the damage is visible or the water loss becomes impossible to ignore. Our underground leak detection work covers all of it - from city-side service connections through to the sprinkler manifold at the back of the yard. See our underground leak detection and irrigation leak detection service pages for more detail.
Irrigation and sprinkler systems are among the most commonly overlooked underground leak sources because the affected zones aren't under constant observation. A cracked mainline between the backflow preventer and the valve manifold can run continuously - not just during irrigation cycles - adding thousands of gallons of loss before a water bill flags it. Signs include zones that stay wet between cycles, a controller that cycles normally but loses pressure at the heads, or a meter that keeps moving when everything is supposed to be off.
Underground water pipe leaks are located primarily through acoustics; we typically also use a safe nitrogen/hydrogen tracer-gas blend as additional confirmation of the leak location. We mark the exact leak point, typically within a foot, so the repair is a targeted dig rather than a trench across the lawn. Your landscaping stays intact until the repair contractor needs to open it, and only where they need to.
In-Home & Under-Slab Leak Detection
Water leaks inside a home follow gravity and find the path of least resistance - which means the visible damage and the actual source are often in different places. A slow leak in a supply line inside a wall cavity can soak insulation for months before it reaches drywall. A pinhole in a hot-water line under the slab can migrate along a concrete crack and surface six feet away. Accurate residential leak detection means finding the source, not the damage.
We approach in-home and slab leak detection the same way we approach underground work: isolate the system, pressurize it, and use acoustic sensors to follow the signal to its origin. For slab locates, that means pinpointing the position relative to the foundation before any concrete is cored. For in-wall work, it means marking the stud bay and height so the patch is surgical. If there's concern about a privately owned gas line downstream of the meter, typically within the home, we can assess it in the same visit. The gas company is responsible for leaks on the underground service line leading up to the meter.
The outcome is always the same: a written summary of findings, included with every invoice, with an exact location and material information where known. Your plumber or repair contractor gets a clear target, not a search zone.
Whether the issue is a slab leak under your foundation or a break in a buried supply line, the detection process follows the same principle: isolate the system, pressurize it, and listen. slab leak detection and underground water leak detection are two of our most requested services, and both benefit enormously from accurate locating before any concrete gets cored or any yard gets opened.
If the source turns out to be on the service line between the meter and the structure, that's an underground locate job. If it's inside the slab itself - a hot-water supply line that's been expanding and contracting against the concrete for years - that's a slab locate job. We handle both with the same non-invasive equipment and the same precision standard.
Common questions from Everett customers
Yes. Non-invasive detection is the whole point. We use acoustic sensors, thermal cameras, and tracer gas - none of which require opening walls, shutting off water to occupied units beyond a brief pressure test, or issuing disruption notices to tenants. We schedule around operational hours when needed.
We isolate the building's water system by floor, riser, or tenant zone using valve and pressure tests, then use acoustic and thermal instruments to follow the leak signal to its source. In many cases we can narrow it to the specific floor and line segment on the first visit.
Yes, regularly. We understand that managed properties have different billing, reporting, and scheduling requirements than residential calls, and we accommodate that. We can coordinate with on-site staff, report to property management directly, and schedule in phases when the property requires it.
We try to accommodate urgency - an active, high-volume leak is a different conversation than a slow, monitored loss. Call us with the details and we'll give you a realistic scheduling window. For situations that can't wait, we make every effort to respond the same day.
Our written summary of findings, included with every invoice, documents the leak source and location with photos. Most insurance adjusters and contractors accept it as part of the claim package. In our experience, the summary provides what is needed to establish the source, scope the repair, and support the claim.
Have a question we didn't answer?
Have a leak? We'll find exactly where it is.
Non-invasive leak detection for homes and businesses in Everett and across Western Washington. Written summary of findings and exact location - same day.